How to use the Home button on iPhone 7

New features of iPhone 7 Home button

Here are the new features of iPhone 7 Home button that you can refer to:

iPhone 7 Home is no longer a traditional physical button; it helps to limit the lack of sensitivity. Besides, the button has an integrated Taptic Engine vibrator to create an effective vibrator when you press it. Moreover, it can create a fake sound even when you put the mobile into slide mode.

How to use iPhone 7 Home button

Hướng dẫn cách sử dụng nút Home trên iPhone 7

Many people want to know how to use the Home button on iPhone 7. It’s not as difficult as you think. Using the home button on iPhone 7 is similar to the Home button on iPhone 5, iPhone 6. To activate the Home button on iPhone 7, you must adjust the required pressure. Apple provides three optional levels 1-2-3 corresponding to the lightest - medium - most potent force.

  • If you want to return to the main screen, you press the Home button once.
  • If you open a multitasking mode, you press twice.
  • If you want to activate, you must have touched the Home button longer.
  • If you want to lower the screen for the Reachability feature, you must touch it softly twice.

Note, you can’t use the gloves to touch the Home button on the iPhone, and if your hands get wet, you can still use them usually!

How to turn off Home button vibration on iPhone 7

With the integration of Taptic Engine technology into the Home button, it will vibrate your iPhone. If you feel bothered or annoyed when the button is vibrated, you can turn it off by following the instructions below:

  • Step 1: From the screen, access to Setting.
  • Step 2: Click on the Sounds and Haptics.
  • Step 3: Switch System Haptics to Off, and you’re done!

How to fix the Home button failure

While using the iPhone 7 Home button, many users have encountered problems like being paralyzed, sinking, hot, complicated or too sensitive. It’s also discolored, can’t be pressed, etc. That affects your smartphone usage.

There are many causes of the error to sound, be disordered, sink or lose vibration, and even be cracked. For example, you have a habit of pressing too hard on the Home button or pressing the button too much, which is very easy to paralyze and make an error.

If you want to fix it, please do one of the methods below:

Methods 1: Restart the iPhone 7

If the Home button has a problem, you can fix it by restarting the smartphone. To reset, you press and hold the Power + Home keys simultaneously for 5-7 seconds until the device turns off, then turn it back on and check.

Methods 2: Re-cleaning the button

How to re-clean is very simple and easy. You can use a little alcohol to drop on the Home button, then use an eraser to touch it to seep around the keyframe. Next, you use a cotton swab to wipe it clean, so it’s over!

Methods 3:

If you don’t want to use the hard Home button on iPhone 7 because you are worried that using too much will be paralyzed or you want to shorten your phone operations, use the virtual Home button would be a reasonable choice:

  • Step 1: From the screen, access to Setting.
  • Step 2: Click on General Setting.
  • Step 3: Click on Accessibility, then select Assistive Touch
  • Step 4: Touch the switch from left to right to activate the virtual Home button on iPhone 7.

From now on, you have already known how to use the iPhone 7 Home button. Hopefully, the information in this article will be helpful for you. If you want to know more and more about the iPhone 7, don’t forget to visit the TCN shop every day!

Post created : 1   
Comment
Your comments must be minimum 30 charachter.
You are commenting as a visitor, you canlogin
Continue Reading
Last views